Product
PBR-SPAN through-fastener panel for roofing and sidewall applications
Manufacturer
Architectural Integrated Metals, Inc.
1724 Northside Industrial Pkwy
Columbus, GA 31904
706-660-1877
866-292-4246
Fax: 706-660-1474
www.ai-metals.com
Description
PBR-SPAN panels, designed for exterior wall and roof applications in agricultural, commercial or industrial settings, utilize through-panel fastening and lap side seam installation. 1¼" ribs with major corrugations spaced 12" o.c. for a total coverage of 36". Panels come in 24- or 26-gauge Galvalume® or G-90 galvanized steel.
Application
Roof or wall covering for new, reroof or retrofit construction
Material Content
PBR-SPAN panels are LEED and EnergyStar certified with a minimum of 30% post-consumer recycled steel content, available in 24- or 26-gauge grade 80 (80,000 psi minimum yield strength) consisting of a minimum AZ50 Galvalume® or G-90 galvanized steel.
Fasteners
PBR-SPAN panels attach to the secondary framing members (purlins or girts) with self-drilling carbon steel screws, No.12 x 1¼" hex head washer, cadmium or zinc plated, assembled with a 0.040" minimum thickness nylon isolation washer. Fasteners are appropriate for use with fiberglass blanket insulation up to 6" thick. PBR-SPAN panel side laps stitched with self-drilling carbon steel screws, No. 14 x 7/8" cadmium or zinc plated, assembled with 0.040" minimum thickness nylon isolation washer.
Sealants and Mastics
All sealants are non-drying, non-hardening, non-oxidizing, butyl rubber-based. Tape mastic for the eave, end splice, ridge flashing and rake trim is non-drying, non-hardening, butyl-based and specifically formulated for field application at temperatures of 20° to 120° F. Service temperature of both sealants is -60° to 180° F.
. |
Flashing
Flashing and trims consist of 24- or 26-gauge steel grade 50 (50,000-psi yield strength). Flashing materials available in AZ50 (minimum) painted Galvalume® steel or G-90 galvanized steel or bare-finish Galvalume® in AZ55 aluminum/zinc alloy.
Finishes
PBR-SPAN panels are available in AIM-PRISM 2000 (Siliconized Polyester) coatings. Special paint finishes other than Sil-Poly are offered on a job-by-job basis. All PRISM-2000 finishes are provided by VALSPAR and come with extended finish warranties. Technical data, including LEED™ certification and material safety documentation provided upon request.
Warranty
Up to 30-year material and finish warranty information available upon request.
Contractor Certification
All contractors must be ACE certified for all warranted projects. Re-certification required every three years. All inspections by third-party Registered Roof Consultants, (RCI).
Maintenance
Routine maintenance required to maximize the life expectancy of the panel. Periodic inspections at the roof, gutter, flashings and walls should be performed to ensure the maximum performance of newly installed products.
Industry Notes
“Oil-canning,” an inherent waviness in sheet metal, is an industry-accepted condition and not cause for rejection |
